Control Resonant Power Lines: All Puzzle Solutions

Ever found yourself staring at a Power Lines puzzle in Control Resonant, completely baffled? You're not alone. These puzzles can be tricky, especially the final one. But don't worry, we've got you covered with solutions for every station.

First, the basics: in each station, you need to place Calibration Units on specific spots and then activate the Tuning Device. The Calibration Instructions document at each location explains this, but the devil is in the details. Let's break it down station by station.

Perimeter Station is the easiest. You need to place three Calibration Units: two far from the Device and one close. One unit is behind a Mold wall on the platform. Another is up the North stairs, blocked by Mold. The third requires you to use a Power Core to open a door. Place them as instructed, hit the Tuning Device, and you're done.

East Park Station steps it up a notch. Your goal is to put a Calibration Unit on each of the three marked squares. Grab one from the North store upstairs, and another is on the platform's South side. Shatter the Mold clumps blocking the squares. Place two units, then trigger the Device to teleport into a closed store with the third unit. Open the door by hitting the electrical panel, place the final unit, and activate the Device again.

Factory Station is where things get complex. You need to place three Calibration Units in a straight line. Find one behind the North platform stairs, another in an open storefront upstairs, and the third on the train's roof on the West track. Place them in a line—two between the benches and one next to the stairs—then activate the Tuning Device. But beware: this teleports you out of the universe to the Vanished Station.

The Vanished Station puzzle is the ultimate brain-melter. After fighting Mold enemies and talking to survivors via payphone, you'll use another Tuning Device to reconnect with Manhattan. There are two Tuning Devices on platforms A and B, and triggering them teleports you between them. You'll need all four Calibration Units. The Mold here grows in light and conducts electricity, so you can use spotlights to grow Mold and link it to solve the puzzle. It's tough, but with these tips, you'll get through it.

So, which station gave you the most trouble? Let us know in the comments!